Large Packet Loss At Guest OS Level in VMware ESXi When Using VMXNET3 - crank out VMXNIC performance

Large Packet Loss At Guest OS Level in VMware ESXi When Using VMXNET3

POSTED BY MICHAEL WEBSTER ON JULY 20, 2014 IN BUSINESS CRITICAL APPLICATIONS, VCDX, VMWARE | 14,163 VIEWS | 6 RESPONSES

Back in 2010 I was helping a large company troubleshoot their virtualized SAP environment, which was experiencing instability and performance problems. One thing we noticed was that the buffers on the NIC’s were periodically overloading due to the large amount of small packets. This was on vSphere 4.0, with Windows 2003 64bit OS at the time and using VMXNET3. Unfortunately at that stage the VMXNET3 driver for Windows didn’t support increasing the send or receive buffers and as a result we had to switch over to E1000 and increase the TX and RX buffers, which resolved the problem (in addition to adding memory reservations to the VM’s). However since vSphere 4.1 it has been possible to modify the buffers in VMXNET3 to resolve these sorts of issues. I have been experiencing this myself in my home lab and have as a result modified the buffers, but it appears I may not be alone in experiencing this.

I thought this was just something I had done in my lab environment. But after reading Michael White’s Newsletter and the VMware KB 2039495 – Large packet loss at the guest OS level on the VMXNET3 vNIC in ESXi 5.x / 4.x, it appears I’m not alone in this. Fortunately it is easy to make the necessary modifications to the buffers and resolve the majority of the packet loss issues as follows:

To reduce burst traffic drops in Windows Buffer Settings:

1. Click Start > Control Panel > Device Manager.
2. Right-click vmxnet3 and click Properties.
3. Click the Advanced tab.
4. Click Small Rx Buffers and increase the value. The default value is 512  and the maximum is 8192.
5. Click Rx Ring #1 Size and increase the value (repeat for RX Ring #2). The default value is 1024 and the maximum is 4096.

In my environment I’ve also set my Large RX Buffers to 8192 and my TX Ring Size to 4096.

If you suspect that your virtual machines may be dropping packets or losing packets then you should consider adjusting the RX and TX buffers. This may well lead to increased performance and more importantly application stability. Sometimes in addition to increasing the buffers you may need to reserve the memory if it’s a very important app. This will ensure it can receive the resources it needs.

Final Word

In most cased the default settings are fine. In some cases there are some adjustments needed. This is one of the cases, if you are experiencing this problem, where adjustments are needed. There is no patch as such to address this problem at this time. But VMware will hopefully make improvements to its drivers and IP stack in future versions of vSphere.